Sliding doors take up the most space due to the small space they take up and due to the fact that the weight of the door is transferred to the ground by special wheels and fittings, so they have the best performance under the operation of automation systems. Large and heavy sliding doors can be built and operated in industrial factories and even aircraft hangars and military centers.

Sliding door fittings:

The following fittings are used for smooth and uniform movement of sliding doors:

- Single bearing and double bearing wheels in the models under the door or above the door

- Rails under the door in two models of installation on the surface and installation inside the concrete

- Bearing and polyamide guides in single, double and quadruple models with different plates for different projects

- Metal steps with shock absorber rubber for the end of the door

Use of automatic sliding systems as barriers in two types with rails and without rails using special Italian fittings

Double sliding door with interior door

When the person-pass door is installed inside the sliding door, safety for the passer-by will be considered, for which mechanical or magnetic microswitches are used and the main door will be stopped as long as the person-pass door is open.

 

Double sliding door

If two sliding doors are used for an entrance opening, it is possible for each of the slide to operate separately with two different control panels or in coordination with a control panel.

 

Multiple telescopic sliding door

Telescopic sliding doors with different number of latches are used to exploit the maximum useful entrance. For this type of door, with the least amount of space occupied by the retractable space of the latches, special fittings are used and by starting the movement of the end latches through the automatic system, other latches are assembled on the end hinge.

 

Attributes:

- Suitable for high-traffic and heavy industrial applications

- Suitable for use in windy areas

- Has a cooling fan and can be used in adverse weather conditions

- Has industrial microswitches to determine the range of motion of the door

- Ability to open the system in a limited way for small vehicles or people

- Move slowly at the end of the track to stop silently

- Has high quality electronic brakes

- Very efficient and reliable system

- Has a thermal protection system by thermal sensors

- Possibility of manual use by the get rid of part

-Possibility of using electronic eyes and magnetic tape in the door area, to prevent collision with a car or person

- Ability to use several different safety systems simultaneously

- The possibility of using warning devices such as flashers, beacons or traffic lights

- Ability to close the door quickly after passing the car

- Ability to set the automatic closing time

 

    

  

- Engine with cooling fan suitable for high traffic

- Professional digital control panel with custom settings

- Manual release switch and lever for use in emergencies

- Powerful gears and microswitches to define range of motion

- Galvanized metal gear for light and heavy doors

 

Sliding door fittings

The following fittings are used for smooth and uniform movement of sliding doors:

- Single bearing wheel and double bearing in the models under the door or above the door

- Rail under the door with two models of installation on the surface and installation inside the concrete

- Bearing and polyamide guides in single, double and quadruple models with different plates for different projects

- Metal steps with shock absorber rubber for the end of the door

 

Powerful and diverse motors with operating voltages of 24, 220, 400 volts, suitable for heavy and light doors in industrial and residential projects with high throughput for specific traffic and battery-operated facilities in 24-volt models.